把 Istio 作为外部服务的代理

把 Istio 入口网关配置为外部服务的代理。

Oct 15, 2019 | By Vadim Eisenberg - IBM

在网格内如何配置一个入口网关来把内部服务暴露出去,让外部可以访问,在这两篇文章中有介绍控制入口流量无 TLS 终止的入口网关。这些服务可以是 HTTP 或者 HTTPS。如果是 HTTPS,网关会透传流量,而不终止 TLS。

这篇博客介绍如何使用 Istio 的入口网关机制来访问外部服务,而不是网格内应用。这样,Istio 整个作为一个代理服务,具有可观测性、流量管理和策略执行的附加价值。

这篇博客也展示了如何配置访问一个外部的 HTTP 和 HTTPS 服务,分别是 httpbin.orgedition.cnn.com

配置一个入口网关

  1. 定义一个入口网关,在 servers: 配置中配置 80443 端口。 在对端口 443 的配置终确定 tls:mode: 配置为 PASSTHROUGH,这配置网关直接透传流量而且不终止 TLS。

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: Gateway
    metadata:
      name: proxy
    spec:
      selector:
        istio: ingressgateway # use istio default ingress gateway
      servers:
      - port:
          number: 80
          name: http
          protocol: HTTP
        hosts:
        - httpbin.org
      - port:
          number: 443
          name: tls
          protocol: TLS
        tls:
          mode: PASSTHROUGH
        hosts:
        - edition.cnn.com
    EOF
    
  2. httpbin.orgedition.cnn.com 创建服务入口,让他们可以通过入口网关访问:

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: httpbin-ext
    spec:
      hosts:
      - httpbin.org
      ports:
      - number: 80
        name: http
        protocol: HTTP
      resolution: DNS
      location: MESH_EXTERNAL
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: cnn
    spec:
      hosts:
      - edition.cnn.com
      ports:
      - number: 443
        name: tls
        protocol: TLS
      resolution: DNS
      location: MESH_EXTERNAL
    EOF
    
  3. 创建一个服务入口,并且为 localhost 服务配置目的规则。在下一步中,需要这个服务入口作为网格内部应用流量到外部服务的目的地,从而隔断来自网格内部的流量。在此例中把 Istio 用作外部应用和外部服务间的代理。

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: ServiceEntry
    metadata:
      name: localhost
    spec:
      hosts:
      - localhost.local
      location: MESH_EXTERNAL
      ports:
      - number: 80
        name: http
        protocol: HTTP
      - number: 443
        name: tls
        protocol: TLS
      resolution: STATIC
      endpoints:
      - address: 127.0.0.1
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: DestinationRule
    metadata:
      name: localhost
    spec:
      host: localhost.local
      trafficPolicy:
        tls:
          mode: DISABLE
          sni: localhost.local
    EOF
    
  4. 为每个外部服务创建一个虚拟服务并配置路由规则。两个虚拟服务的 gateways:match: 配置中有针对 HTTP 和 HTTPS 流量相关的 proxy 网关配置。

    注意 route: 配置中的 mesh 网关配置,这个网关代表网格内的应用程序。mesh 网关中的 route: 配置表示如何将流量转向 localhost.local 服务,从而有效地阻隔了流量。

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: VirtualService
    metadata:
      name: httpbin
    spec:
      hosts:
      - httpbin.org
      gateways:
      - proxy
      - mesh
      http:
      - match:
        - gateways:
          - proxy
          port: 80
          uri:
            prefix: /status
        route:
        - destination:
            host: httpbin.org
            port:
              number: 80
      - match:
        - gateways:
          - mesh
          port: 80
        route:
        - destination:
            host: localhost.local
            port:
              number: 80
    ---
    apiVersion: networking.istio.io/v1alpha3
    kind: VirtualService
    metadata:
      name: cnn
    spec:
      hosts:
      - edition.cnn.com
      gateways:
      - proxy
      - mesh
      tls:
      - match:
        - gateways:
          - proxy
          port: 443
          sni_hosts:
          - edition.cnn.com
        route:
        - destination:
            host: edition.cnn.com
            port:
              number: 443
      - match:
        - gateways:
          - mesh
          port: 443
          sni_hosts:
          - edition.cnn.com
        route:
        - destination:
            host: localhost.local
            port:
              number: 443
    EOF
    
  5. 启用 Envoy 的访问日志

  6. 根据确定入口网关的 IP 和端口中的命令,设置 SECURE_INGRESS_PORTINGRESS_HOST 两个环境变量。

  7. 在上一步中分别把 IP 和端口存储到了环境变量 $INGRESS_HOST$INGRESS_PORT 中,现在可以用这个 IP 和端口访问 httpbin.org 服务。访问 httpbin.org 服务的 /status/418 路径,会返回 418 我是一个茶壶的 HTTP 状态码。

    $ curl $INGRESS_HOST:$INGRESS_PORT/status/418 -Hhost:httpbin.org
    
    -=[ teapot ]=-
    
       _...._
     .'  _ _ `.
    | ."` ^ `". _,
    \_;`"---"`|//
      |       ;/
      \_     _/
        `"""`
    
  8. 如果 Istio 入口网关部署在 istio-system 名字空间下,使用下面的命令打印网关日志。

    $ kubectl logs -l istio=ingressgateway -c istio-proxy -n istio-system | grep 'httpbin.org'
    
  9. 检索日志找到类似如下内容:

    [2019-01-31T14:40:18.645Z] "GET /status/418 HTTP/1.1" 418 - 0 135 187 186 "10.127.220.75" "curl/7.54.0" "28255618-6ca5-9d91-9634-c562694a3625" "httpbin.org" "34.232.181.106:80" outbound|80||httpbin.org - 172.30.230.33:80 10.127.220.75:52077 -
    
  10. 通过入口网关访问 edition.cnn.com 服务:

    $ curl -s --resolve edition.cnn.com:$SECURE_INGRESS_PORT:$INGRESS_HOST https://edition.cnn.com:$SECURE_INGRESS_PORT | grep -o "<title>.*</title>"
    <title>CNN International - Breaking News, US News, World News and Video</title>
    
  11. 如果 Istio 入口网关部署在 istio-system 名字空间下,使用下面的命令打印网关日志。

    $ kubectl logs -l istio=ingressgateway -c istio-proxy -n istio-system | grep 'edition.cnn.com'
    
  12. 检索日志找到类似如下内容:

    [2019-01-31T13:40:11.076Z] "- - -" 0 - 589 17798 1644 - "-" "-" "-" "-" "172.217.31.132:443" outbound|443||edition.cnn.com 172.30.230.33:54508 172.30.230.33:443 10.127.220.75:49467 edition.cnn.com
    

清除

删除网关、虚拟服务和服务入口:

$ kubectl delete gateway proxy
$ kubectl delete virtualservice cnn httpbin
$ kubectl delete serviceentry cnn httpbin-ext localhost
$ kubectl delete destinationrule localhost

Share this blog on social!