Ingress Gateways

In a Kubernetes environment, the Kubernetes Ingress Resource is used to specify services that should be exposed outside the cluster. In an Istio service mesh, a better approach (which also works in both Kubernetes and other environments) is to use a different configuration model, namely Istio Gateway. A Gateway allows Istio features such as monitoring and route rules to be applied to traffic entering the cluster.

This task describes how to configure Istio to expose a service outside of the service mesh using an Istio Gateway.

Before you begin

  • Setup Istio by following the instructions in the Installation guide.

  • Make sure your current directory is the istio directory.

  • Start the httpbin sample.

    If you have enabled automatic sidecar injection, deploy the httpbin service:

    Zip
    $ kubectl apply -f @samples/httpbin/httpbin.yaml@
    

    Otherwise, you have to manually inject the sidecar before deploying the httpbin application:

    Zip
    $ kubectl apply -f <(istioctl kube-inject -f @samples/httpbin/httpbin.yaml@)
    
  • Determine the ingress IP and ports as described in the following subsection.

Determining the ingress IP and ports

Execute the following command to determine if your Kubernetes cluster is running in an environment that supports external load balancers:

$ kubectl get svc istio-ingressgateway -n istio-system
NAME                   TYPE           CLUSTER-IP       EXTERNAL-IP     PORT(S)                                      AGE
istio-ingressgateway   LoadBalancer   172.21.109.129   130.211.10.121  80:31380/TCP,443:31390/TCP,31400:31400/TCP   17h

If the EXTERNAL-IP value is set, your environment has an external load balancer that you can use for the ingress gateway. If the EXTERNAL-IP value is <none> (or perpetually <pending>), your environment does not provide an external load balancer for the ingress gateway. In this case, you can access the gateway using the service’s node port.

Choose the instructions corresponding to your environment:

Follow these instructions if you have determined that your environment has an external load balancer.

Set the ingress IP and ports:

$ export INGRESS_HOST=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
$ export INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="http2")].port}')
$ export SECURE_INGRESS_PORT=$(kubectl -n istio-system get service istio-ingressgateway -o jsonpath='{.spec.ports[?(@.name=="https")].port}')

Configuring ingress using an Istio Gateway

An ingress Gateway describes a load balancer operating at the edge of the mesh that receives incoming HTTP/TCP connections. It configures exposed ports, protocols, etc. but, unlike Kubernetes Ingress Resources, does not include any traffic routing configuration. Traffic routing for ingress traffic is instead configured using Istio routing rules, exactly in the same was as for internal service requests.

Let’s see how you can configure a Gateway on port 80 for HTTP traffic.

  1. Create an Istio Gateway:

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: Gateway
    metadata:
      name: httpbin-gateway
    spec:
      selector:
        istio: ingressgateway # use Istio default gateway implementation
      servers:
      - port:
          number: 80
          name: http
          protocol: HTTP
        hosts:
        - "httpbin.example.com"
    EOF
    
  2. Configure routes for traffic entering via the Gateway:

    $ kubectl apply -f - <<EOF
    apiVersion: networking.istio.io/v1alpha3
    kind: VirtualService
    metadata:
      name: httpbin
    spec:
      hosts:
      - "httpbin.example.com"
      gateways:
      - httpbin-gateway
      http:
      - match:
        - uri:
            prefix: /status
        - uri:
            prefix: /delay
        route:
        - destination:
            port:
              number: 8000
            host: httpbin
    EOF
    

    You have now created a virtual service configuration for the httpbin service containing two route rules that allow traffic for paths /status and /delay.

    The gateways list specifies that only requests through your httpbin-gateway are allowed. All other external requests will be rejected with a 404 response.

  3. Access the httpbin service using curl:

    $ curl -I -HHost:httpbin.example.com http://$INGRESS_HOST:$INGRESS_PORT/status/200
    HTTP/1.1 200 OK
    server: envoy
    date: Mon, 29 Jan 2018 04:45:49 GMT
    content-type: text/html; charset=utf-8
    access-control-allow-origin: *
    access-control-allow-credentials: true
    content-length: 0
    x-envoy-upstream-service-time: 48
    

    Note that you use the -H flag to set the Host HTTP header to “httpbin.example.com”. This is needed because your ingress Gateway is configured to handle “httpbin.example.com”, but in your test environment you have no DNS binding for that host and are simply sending your request to the ingress IP.

  4. Access any other URL that has not been explicitly exposed. You should see an HTTP 404 error:

    $ curl -I -HHost:httpbin.example.com http://$INGRESS_HOST:$INGRESS_PORT/headers
    HTTP/1.1 404 Not Found
    date: Mon, 29 Jan 2018 04:45:49 GMT
    server: envoy
    content-length: 0
    

Accessing ingress services using a browser

Entering the httpbin service URL in a browser won’t work because you can’t pass the Host header to a browser like you did with curl. In a real world situation, this is not a problem because you configure the requested host properly and DNS resolvable. Thus, you use the host’s domain name in the URL, for example, https://httpbin.example.com/status/200.

To work around this problem for simple tests and demos, use a wildcard * value for the host in the Gateway and VirtualService configurations. For example, if you change your ingress configuration to the following:

$ kubectl apply -f - <<EOF
apiVersion: networking.istio.io/v1alpha3
kind: Gateway
metadata:
  name: httpbin-gateway
spec:
  selector:
    istio: ingressgateway # use Istio default gateway implementation
  servers:
  - port:
      number: 80
      name: http
      protocol: HTTP
    hosts:
    - "*"
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
  name: httpbin
spec:
  hosts:
  - "*"
  gateways:
  - httpbin-gateway
  http:
  - match:
    - uri:
        prefix: /headers
    route:
    - destination:
        port:
          number: 8000
        host: httpbin
EOF

You can then use $INGRESS_HOST:$INGRESS_PORT in the browser URL. For example, http://$INGRESS_HOST:$INGRESS_PORT/headers will display all the headers that your browser sends.

Understanding what happened

The Gateway configuration resources allow external traffic to enter the Istio service mesh and make the traffic management and policy features of Istio available for edge services.

In the preceding steps, you created a service inside the service mesh and exposed an HTTP endpoint of the service to external traffic.

Troubleshooting

  1. Inspect the values of the INGRESS_HOST and INGRESS_PORT environment variables. Make sure they have valid values, according to the output of the following commands:

    $ kubectl get svc -n istio-system
    $ echo INGRESS_HOST=$INGRESS_HOST, INGRESS_PORT=$INGRESS_PORT
    
  2. Check that you have no other Istio ingress gateways defined on the same port:

    $ kubectl get gateway --all-namespaces
    
  3. Check that you have no Kubernetes Ingress resources defined on the same IP and port:

    $ kubectl get ingress --all-namespaces
    
  4. If you have an external load balancer and it does not work for you, try to access the gateway using its node port.

Cleanup

Delete the Gateway and VirtualService configuration, and shutdown the httpbin service:

Zip
$ kubectl delete gateway httpbin-gateway
$ kubectl delete virtualservice httpbin
$ kubectl delete --ignore-not-found=true -f @samples/httpbin/httpbin.yaml@