Google Kubernetes Engine

This example shows how to configure a multicluster mesh with a single-network deployment over 2 Google Kubernetes Engine clusters.

Before you begin

In addition to the prerequisites for installing Istio the following setup is required for this example:

  • This sample requires a valid Google Cloud Platform project with billing enabled. If you are not an existing GCP user, you may be able to enroll for a $300 US Free Trial credit.

  • Install and initialize the Google Cloud SDK

Create the GKE Clusters

  1. Set the default project for gcloud to perform actions on:

    $ gcloud config set project myProject
    $ proj=$(gcloud config list --format='value(core.project)')
  2. Create 2 GKE clusters for use with the multicluster feature. Note: --enable-ip-alias is required to allow inter-cluster direct pod-to-pod communication. The zone value must be one of the GCP zones.

    $ zone="us-east1-b"
    $ cluster="cluster-1"
    $ gcloud container clusters create $cluster --zone $zone --username "admin" \
      --machine-type "n1-standard-2" --image-type "COS" --disk-size "100" \
      --scopes "","",\
    "" \
    --num-nodes "4" --network "default" --enable-cloud-logging --enable-cloud-monitoring --enable-ip-alias --async
    $ cluster="cluster-2"
    $ gcloud container clusters create $cluster --zone $zone --username "admin" \
      --machine-type "n1-standard-2" --image-type "COS" --disk-size "100" \
      --scopes "","",\
    "" \
    --num-nodes "4" --network "default" --enable-cloud-logging --enable-cloud-monitoring --enable-ip-alias --async
  3. Wait for clusters to transition to the RUNNING state by polling their statuses via the following command:

    $ gcloud container clusters list
  4. Get the clusters’ credentials (command details):

    $ gcloud container clusters get-credentials cluster-1 --zone $zone
    $ gcloud container clusters get-credentials cluster-2 --zone $zone
  5. Validate kubectl access to each cluster and create a cluster-admin cluster role binding tied to the Kubernetes credentials associated with your GCP user.

    1. For cluster-1:

      $ kubectl config use-context "gke_${proj}_${zone}_cluster-1"
      $ kubectl get pods --all-namespaces
      $ kubectl create clusterrolebinding cluster-admin-binding --clusterrole=cluster-admin --user="$(gcloud config get-value core/account)"
    2. For cluster-2:

      $ kubectl config use-context "gke_${proj}_${zone}_cluster-2"
      $ kubectl get pods --all-namespaces
      $ kubectl create clusterrolebinding cluster-admin-binding --clusterrole=cluster-admin --user="$(gcloud config get-value core/account)"

Create a Google Cloud firewall rule

To allow the pods on each cluster to directly communicate, create the following rule:

$ function join_by { local IFS="$1"; shift; echo "$*"; }
$ ALL_CLUSTER_CIDRS=$(gcloud container clusters list --format='value(clusterIpv4Cidr)' | sort | uniq)
$ ALL_CLUSTER_CIDRS=$(join_by , $(echo "${ALL_CLUSTER_CIDRS}"))
$ ALL_CLUSTER_NETTAGS=$(gcloud compute instances list --format='value(tags.items.[0])' | sort | uniq)
$ gcloud compute firewall-rules create istio-multicluster-test-pods \
  --allow=tcp,udp,icmp,esp,ah,sctp \
  --direction=INGRESS \
  --priority=900 \
  --source-ranges="${ALL_CLUSTER_CIDRS}" \
  --target-tags="${ALL_CLUSTER_NETTAGS}" --quiet

Install the Istio control plane

The following generates an Istio installation manifest, installs it, and enables automatic sidecar injection in the default namespace:

$ kubectl config use-context "gke_${proj}_${zone}_cluster-1"
$ helm template install/kubernetes/helm/istio --name istio --namespace istio-system > $HOME/istio_master.yaml
$ kubectl create ns istio-system
$ helm template install/kubernetes/helm/istio-init --name istio-init --namespace istio-system | kubectl apply -f -
$ kubectl apply -f $HOME/istio_master.yaml
$ kubectl label namespace default istio-injection=enabled

Wait for pods to come up by polling their statuses via the following command:

$ kubectl get pods -n istio-system

Generate remote cluster manifest

  1. Get the IPs of the control plane pods:

    $ export PILOT_POD_IP=$(kubectl -n istio-system get pod -l istio=pilot -o jsonpath='{.items[0].status.podIP}')
    $ export POLICY_POD_IP=$(kubectl -n istio-system get pod -l istio=mixer -o jsonpath='{.items[0].status.podIP}')
    $ export TELEMETRY_POD_IP=$(kubectl -n istio-system get pod -l istio-mixer-type=telemetry -o jsonpath='{.items[0].status.podIP}')
  2. Generate remote cluster manifest:

    $ helm template install/kubernetes/helm/istio \
      --namespace istio-system --name istio-remote \
      --values @install/kubernetes/helm/istio/values-istio-remote.yaml@ \
      --set global.remotePilotAddress=${PILOT_POD_IP} \
      --set global.remotePolicyAddress=${POLICY_POD_IP} \
      --set global.remoteTelemetryAddress=${TELEMETRY_POD_IP} > $HOME/istio-remote.yaml

Install remote cluster manifest

The following installs the minimal Istio components and enables automatic sidecar injection on the namespace default in the remote cluster:

$ kubectl config use-context "gke_${proj}_${zone}_cluster-2"
$ kubectl create ns istio-system
$ kubectl apply -f $HOME/istio-remote.yaml
$ kubectl label namespace default istio-injection=enabled

Create remote cluster’s kubeconfig for Istio Pilot

The istio-remote Helm chart creates a service account with minimal access for use by Istio Pilot discovery.

  1. Prepare environment variables for building the kubeconfig file for the service account istio-multi:

    $ export WORK_DIR=$(pwd)
    $ CLUSTER_NAME=$(kubectl config view --minify=true -o jsonpath='{.clusters[].name}')
    $ SERVER=$(kubectl config view --minify=true -o jsonpath='{.clusters[].cluster.server}')
    $ NAMESPACE=istio-system
    $ SERVICE_ACCOUNT=istio-multi
    $ SECRET_NAME=$(kubectl get sa ${SERVICE_ACCOUNT} -n ${NAMESPACE} -o jsonpath='{.secrets[].name}')
    $ CA_DATA=$(kubectl get secret ${SECRET_NAME} -n ${NAMESPACE} -o jsonpath="{.data['ca\.crt']}")
    $ TOKEN=$(kubectl get secret ${SECRET_NAME} -n ${NAMESPACE} -o jsonpath="{.data['token']}" | base64 --decode)
  2. Create a kubeconfig file in the working directory for the service account istio-multi:

    $ cat <<EOF > ${KUBECFG_FILE}
    apiVersion: v1
       - cluster:
           certificate-authority-data: ${CA_DATA}
           server: ${SERVER}
         name: ${CLUSTER_NAME}
       - context:
           cluster: ${CLUSTER_NAME}
           user: ${CLUSTER_NAME}
         name: ${CLUSTER_NAME}
    current-context: ${CLUSTER_NAME}
    kind: Config
    preferences: {}
       - name: ${CLUSTER_NAME}
           token: ${TOKEN}

At this point, the remote clusters’ kubeconfig files have been created in the ${WORK_DIR} directory. The filename for a cluster is the same as the original kubeconfig cluster name.

Configure Istio control plane to discover the remote cluster

Create a secret and label it properly for each remote cluster:

$ kubectl config use-context "gke_${proj}_${zone}_cluster-1"
$ kubectl create secret generic ${CLUSTER_NAME} --from-file ${KUBECFG_FILE} -n ${NAMESPACE}
$ kubectl label secret ${CLUSTER_NAME} istio/multiCluster=true -n ${NAMESPACE}

Deploy Bookinfo Example Across Clusters

  1. Install Bookinfo on the first cluster. Remove the reviews-v3 deployment to deploy on remote:

    $ kubectl config use-context "gke_${proj}_${zone}_cluster-1"
    $ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo.yaml@
    $ kubectl apply -f @samples/bookinfo/networking/bookinfo-gateway.yaml@
    $ kubectl delete deployment reviews-v3
  2. Install the reviews-v3 deployment on the remote cluster.

    $ kubectl config use-context "gke_${proj}_${zone}_cluster-2"
    $ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo.yaml@ -l service=ratings
    $ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo.yaml@ -l service=reviews
    $ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo.yaml@ -l account=reviews
    $ kubectl apply -f @samples/bookinfo/platform/kube/bookinfo.yaml@ -l app=reviews,version=v3

    Note: The ratings service definition is added to the remote cluster because reviews-v3 is a client of ratings and creating the service object creates a DNS entry. The Istio sidecar in the reviews-v3 pod will determine the proper ratings endpoint after the DNS lookup is resolved to a service address. This would not be necessary if a multicluster DNS solution were additionally set up, e.g. as in a federated Kubernetes environment.

  3. Get the istio-ingressgateway service’s external IP to access the bookinfo page to validate that Istio is including the remote’s reviews-v3 instance in the load balancing of reviews versions:

    $ kubectl config use-context "gke_${proj}_${zone}_cluster-1"
    $ kubectl get svc istio-ingressgateway -n istio-system

    Access http://<GATEWAY_IP>/productpage repeatedly and each version of reviews should be equally loadbalanced, including reviews-v3 in the remote cluster (red stars). It may take several accesses (dozens) to demonstrate the equal loadbalancing between reviews versions.


The following should be done in addition to the uninstall of Istio as described in the VPN-based multicluster uninstall section:

  1. Delete the Google Cloud firewall rule:

    $ gcloud compute firewall-rules delete istio-multicluster-test-pods --quiet
  2. Delete the cluster-admin cluster role binding from each cluster no longer being used for Istio:

    $ kubectl delete clusterrolebinding gke-cluster-admin-binding
  3. Delete any GKE clusters no longer in use. The following is an example delete command for the remote cluster, cluster-2:

    $ gcloud container clusters delete cluster-2 --zone $zone